Plug-in relay for FA market suitable for control panel use with built-in Bestact high capacity type.
| 文字サイズ |
|---|
Plug-in Relays
2-pole/3-pole relay for FA market FA2PE20 FA3PE21
▼Features
The glass-enclosed contacts are unaffected by the external atmosphere, solving the contact failure problem of in-air contact type relays.
Long mechanical life with few driving parts ensures long life even in high frequency switching applications.
Since glow discharge is performed at the time of inductive load disconnection, surge voltage is low and the product is friendly to the electronic components of peripheral equipment.
The mechanical contact provides complete insulation, preventing equipment malfunctions caused by leakage current from semiconductor relays.
The glass-enclosed contacts are unaffected by the external atmosphere, solving the contact failure problem of in-air contact type relays.
Long mechanical life with few driving parts ensures long life even in high frequency switching applications.
Since glow discharge is performed at the time of inductive load disconnection, surge voltage is low and the product is friendly to the electronic components of peripheral equipment.
The mechanical contact provides complete insulation, preventing equipment malfunctions caused by leakage current from semiconductor relays.
Ratings and Specifications
Type | FA2PE20/□ | FA3PE21/□ | |
Contact Arrangement | 2NO | 2NO1NC | |
Rated Insulation Voltage | 250VAC（Power Frequency） | ||
Incorporated Bestact | R15 | ||
Contact Performance | Rated Continuous Current* | 5A | |
Rated Operational Current* | 220VAC 1A (inductive load) 220VDC 0.2A（L/R=100ms） 110VDC 0.5A（L/R=100ms） | ||
Maximum Making Current* | 220VAC 30A（cosφ=0.3 to 0.4） | ||
Maximum Breaking Current* | 220VAC 30A（cosφ=0.3 to 0.4） 220VDC 0.4A（L/R=100ms） 110VDC 0.6A （L/R=100ms） | ||
Initial Contact Resistance | 500mΩ or less（6VDC 1A） | ||
Minimum Operational Power Ratings* | 24V 1mA | ||
Insulation Resistance | 100MΩ or greater (with 500VDC Megger) | ||
Withstand Voltage | 2000VAC for 1minute (Across Open Contacts：800VAC for 1minute) Current leakage：3mA | ||
Vibration Resistance* | (Erroneous Operation) | 10 to 55Hz 0.15㎜(0 - Peak) | |
Shock Resistance* | (Erroneous Operation) | 49m/s²(5G) for 30ms | |
Operating Time* | 40ms or less | ||
Releasing Time* | 40ms or less | ||
Ambient Temperature (With no freezing or condensation) | Operating | -10℃ to 55℃ | |
Storage | -25℃ to 70℃ | ||
Approx. Weight | 120g | ||
Note: See GLOSSARY OF TERMS.
Coil Specifications
Type | FA2PE20/D24 | FA2PE20/W1H | FA2PE20/W2H |
Rated Voltage (E) | 24VDC | 100VAC | 200VAC |
Rated Power Consumption (W) | Approx.1.9W | Approx.2VA | Approx.2.8VA |
Maximum Allowable Voltage* | 130%E in operating ambient temperature range | ||
Voltage Variation Range | 80%E to 110%E in operating ambient temperature range | ||
Operating Voltage | 80%E or less in operating ambient temperature range | ||
Releasing Voltage | 5%E or greater in operating ambient temperature range | ||
Type | FA3PE21/D24 | FA3PE21/W1H | FA3PE21/W2H |
Rated Voltage (E) | 24VDC | 100VAC | 200VAC |
Rated Power Consumption (W) | Approx.1.9W | Approx.2VA | Approx.2.8VA |
Maximum Allowable Voltage* | 130%E in operating ambient temperature range | ||
Voltage Variation Range | 80%E to 110%E in operating ambient temperature range | ||
Operating Voltage | 80%E or less in operating ambient temperature range | ||
Releasing Voltage | 5%E or greater in operating ambient temperature range | ||
Note: See GLOSSARY OF TERMS.
Glossary of Terms
Term | Definition |
Rated Continuous Current | Rated continuous current is the current value which can be energized continuously without exceeding the allowable temperature rise under the condition without breaking contacts. |
Rated Operational Current | Rated operational current is the current value which is combined with a rated operational voltage and used in regulated conditions (making/breaking current, switching frequency and electric switching durability). At 220VAC, the current is set at 10 times this value upon making (PF: 0.6 to 0.7) and 1 times this value upon breaking (PF: 0.3 to 0.4). Rated operational current 0.5A means 5A making and 0.5A breaking. At 110VDC and 220VDC, the current is set at 1 times making and 1times breaking and indicated by inductive load (L/R=100ms). |
Maximum Making Current | Maximum making current is the current value which enables 10 times making referring to IEC 62246-1. |
Maximum Breaking Current | Maximum making current is the current value which enables 10 times breaking referring to IEC 62246-1. At 110 VDC and 220 VDC, maximum making current is the current value which enables 10 times breaking by inductive load (L/R=100ms). |
Operating Time | Conditions：Ta=20℃ cold start, rated coil voltage is applied. Bounce Time not Included |
Releasing Time | Conditions：Ta=20℃ cold start, rated coil voltage is applied and turn off from rated voltage applied state. |
Vibration/Shock resistance | Values of vibration/shock resistance are obtained when Bestact is equipped with a vibration proof band. |
Maximum allowable voltage | Maximum allowable voltage is the maximum value that can be applied to the coil in consideration of its thermal degradation and insulators in the relays.This is not a continuous allowable voltage. |
Dimensions (㎜)
