Type | | RZDR-G21□ | | |
Contact Arrangement
| 3NO
| 2NO1NC
| 1NO2NC
| 3NC
|
Built-in Contact Type (Bestact)
| |
Contact Performance
| Rated Operational Current (Inductive Load) | 240VAC 0.5A(50/60Hz) 115VDC 0.3A(L/R=40ms) |
Minimum Operational Power Ratings | 24VDC 1mA Failure Rate λ₆₀=4.6×10⁻⁹(/time)or less |
Initial Contact Resistance | 500mΩ or less(6VDC 1A) |
Operating Time
| 5ms or less (excluding bounce time)
|
Releasing Time
| 5ms or less (excluding bounce time)
|
Bounce Time
| 3ms or less |
Rated Insulation Voltage
| 250VAC (50/60Hz)
|
Insulation Resistance
| Across open contacts, between coil and contact, and between contacts : 100MΩ or greater (with 500VDC Megger)
|
Withstand Voltage
| Across open contacts : 500VAC, 1 min (50/60Hz), Between coil and contact, and between contacts : 1500VAC, 1 min (50/60Hz)
|
Vibration Resistance
| IEC 61373 Category1 Class B
|
Shock Resistance
| IEC 61373 Category1 Class B
|
Operating Temperature
| Type suffix T1:-25℃ to +70℃, Type suffix T2:-40℃ to +70℃
|
Storage Temperature
| -40℃ to +85℃
|
Approx. Weight
| 75g |
Note:
1. The contact performance specifications refer to the built-in contacts.
2. The rated operational current indicates the current value to be used under the rated operational voltage and specified conditions (make and break current, switching frequency, and electrical endurance).
For 240VAC: The setting is based on 10× make (cosφ = 0.6–0.7) and 1× break (cosφ = 0.3–0.4). A rated operational current of 1A means 10A for making and 1A for breaking. For 115VDC: The setting is based on 1× make and 1× break, specified for inductive loads (L/R = 40ms).
3. The operating time of NO contact and NC contact may overlap.
4. Time characteristics are values measured at an ambient temperature of +20℃ with the coil energized at its rated voltage.
5. Temperature characteristics are values under conditions without freezing or condensation.